Explorer 4WD V6-4.0L (2009)
RH side
5. Remove the RH hydraulic timing chain tensioner.
-
Discard the washer.
6. Install the Camshaft Sprocket Holding Tool and the Adapter for 303-564 on the rear of the RH cylinder head and tighten the top 2 clamp bolts to
10 Nm (89 lb-in).
7. NOTICE: The RH camshaft sprocket bolt is a LH-threaded bolt. Turning the bolt in the wrong direction can damage the bolt.
Using the Torque Wrench Extension and the Camshaft Sprocket Nut Socket, loosen the camshaft sprocket bolt.
8. Remove the bolt and position the camshaft sprocket aside.
LH side
9. Remove the LH hydraulic timing chain tensioner.
-
Discard the washer.
10. Rotate the accessory drive belt tensioner counterclockwise and detach the accessory drive belt from the A/C compressor and power steering pump
pulleys.
11. Remove the bolts and position the A/C compressor and power steering pump bracket aside.
12. Install the Camshaft Sprocket Holding Tool and the Adapter for 303-564 on the front of the LH camshaft and tighten the 2 top clamp bolts to 10
Nm (89 lb-in).
