Explorer 4WD V6-4.0L VIN E (1999)
Band Apply Servo: Service and Repair
Front Servo
Special Tools
Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove the shift cable.
1
Disconnect the shift cable from the manual control lever.
2
Remove the shift cable from the bracket.
4. Remove the digital Transmission Range (TR) sensor.
5. Remove the main control valve body.
6. Remove the Three Way Catalytic Converter (TWC).
7. Remove the transmission servo heat shield.
1
Remove the transmission servo heat shield nut.
2
Remove the transmission servo heat shield.
