Explorer 4WD V6-4.0L VIN E (1999)
9. Remove the stabilizer bar link.
10. Remove and discard the nut.
11. CAUTION: Do not allow the knuckle to hang freely. It is possible to overextend and internally separate each inner CV joint from its housing.
Using the special tool, disconnect the upper ball joint from the knuckle.
12. CAUTION: Do not use a hammer to separate the outboard CV joint from the hub. Damage to the threads and internal CV joint components may
result.
Using the special tool, press the outboard CV joint until it is loose in the hub.
