Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
8. Install the shift cable.
1. Install the shift cable.
2. Install the shift cable to the manual control lever.
9. Install the digital Transmission Range (TR) sensor.
10. Lower the vehicle.
11. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its
adaptive strategy. The customer needs to be notified that they may experience slightly different upshifts either soft or firm and this is a temporary
condition and will eventually return to normal operating condition.
Connect the battery ground cable.
12. Fill the transmission to the correct fluid level and check for correct transmission operation.
^
Use MERCON(R) V Automatic Transmission Fluid XT-5-QM or equivalent meeting MERCON(R) V specification.
