ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2812 > < Initial Inspection and Diagnostic Overview|Page 2810
Page 46
background image

No

CONNECT the negative battery cable. GO to Q46.

-------------------------------------------------
Q13 VERIFY VEHICLE EQUIPMENT - HVAC MODULE

-

Inspect the vehicle for an HVAC module.

-

Is the vehicle equipped with an HVAC module?

Yes

GO to Q14.

No

GO to Q15.

-------------------------------------------------
Q14 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE HVAC MODULE
DISCONNECTED

-

Disconnect: HVAC Module C228a.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to Q15.

No

CONNECT the negative battery cable. GO to Q47.

-------------------------------------------------
Q15 VERIFY VEHICLE EQUIPMENT - RETM

-

Inspect the vehicle for an RETM.

-

Is the vehicle equipped with an RETM?

Yes

GO to Q16.

No

GO to Q17.

-------------------------------------------------
Q16 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE RETM DISCONNECTED

-

Disconnect: RETM C9029.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

Initial Inspection and Diagnostic Overview|Page 2812 > < Initial Inspection and Diagnostic Overview|Page 2810