Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
1
Connect the seat backrest recliner actuator.
2
Install the screws.
-
Tighten until the screws are fully seated.
14. Install the seat cushion.
40 Percent Portion of 60/40 Split Bench
DISASSEMBLY
1. Remove the rear seat.
2. Remove the rear seat legs.
1
Remove the pivot bolts.
2
Remove the rear seat legs.
3. Unhook the seat cushion trim cover J-clips.
4. Remove the seat cushion trim cover.
-
Separate the seat cushion trim cover from the hook and loop strip.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip or the hook and loop strip may be torn from the
seat cushion foam.