Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
Install the TSS sensor wire.
1. Install TSS sensor wire into (16-pin) case connector.
2. Install TSS sensor wire into the locator.
4. CAUTION: Do not overstretch the retaining spring.
Install the transmission case (16-pin) electrical connector retaining spring.
5. Install the EPC and SSB solenoids.
6. CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.