F 150 2WD V8-4.6L VIN 8 (2009)
Removal
NOTICE: Do not use any supplemental transmission fluid additives or cleaning agents. The use of these products could cause internal
transmission components to fail; this will affect the operation of the transmission.
Use of a transmission fluid other than specified could result in transmission failure.
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
Four-Wheel Drive (4WD) vehicles
2. Remove the front driveshaft shield nuts and remove the shield.
3. NOTE: It is not necessary to remove the front driveshaft from the vehicle.
Index-mark the front driveshaft flange to the pinion flange and rear driveshaft flange to the transfer case flange. Disconnect the front driveshaft
and position aside.
All vehicles
4. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the
selector lever cable bracket.