F 150 2WD V8-5.4L Flex Fuel (2008)
RH engine support insulator
10. Install the starter.
All vehicles
11. Tighten the transmission mount nuts.
^
Tighten to 103 Nm (76 lb-ft).
12. Install the exhaust system support bracket bolts to the crossmember.
^
Tighten to 40 Nm (30 lb-ft).
13. Install the 4 exhaust manifold-to-catalytic converter nuts.
^
Tighten to 40 Nm (30 lb-ft).
14. If equipped, position the skid plate and install the 4 bolts.
^
Tighten to 25 Nm (18 lb-ft).
