F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
2. Remove the three bolts, the oil pump screen and pickup tube and the spacer.
3. Remove the oil pump.
^
Remove the three bolts.
^
Remove the oil pump.
Items 8-12: Oil Pump, Oil Pump Screen and Pickup Tube and Bolts Installation Note
1. NOTE: Lubricate the new 0-ring seal with clean engine oil.
Clean and inspect the mating surfaces and install a new 0-ring seal.
2. Install the oil pump and loosely install the bolts.
^
Position the oil pump.
^
Loosely install the bolts.
^
Tighten the bolts in the sequence shown.
3. CAUTION: Make sure the O-ring is in place and not damaged. A missing or damaged O-ring can cause foam in the lubrication system, low oil
pressure and severe engine damage.
NOTE: Install a new 0-ring and lubricate with clean engine oil.
