F 150 4WD V8-4.6L VIN 8 (2010)
Antenna Cable: Service and Repair
Antenna Cable - AM/FM
Antenna Cable - AM/FM
Removal and Installation
1. Remove the Audio Control Module (ACM). For additional information, refer to Audio Control Module (ACM) See: Cellular
Phone/Communications Control Module/Service and Repair/Removal and Replacement/Audio Control Module (ACM).
2. Lower the glove compartment completely.
3. Disconnect the AM/FM antenna cable from the AM/FM antenna.
4. Separate the pushpins and remove the AM/FM antenna cable.
5. To install, reverse the removal procedure.
