ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Trailer Lighting Relay > < Initial Inspection and Diagnostic Overview|Page 7441
Page 27
background image

controller C2142-14, circuit CAT19 (BU), harness side.

-

Measure the voltage between the trailer tow C439a-3, circuit CAT19 (BU), harness side and ground.

-

Is the voltage greater than 10 volts?

Yes

REMOVE the jumper wire. INSTALL a new TBC module. TEST the system for normal operation.

No

REMOVE the jumper wire. REPAIR circuit CAT19 (BU) for an open. TEST the system for normal operation.

-------------------------------------------------

Trailer Lighting Relay > < Initial Inspection and Diagnostic Overview|Page 7441