F 150 4WD V8-4.6L VIN 8 (2010)
Removal
WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component.
Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNING: Before working on or disconnecting any of the fuel tubes or fuel system components, relieve the fuel system pressure to prevent
accidental spraying of fuel. Fuel in the fuel system remains under high pressure, even when the engine is not running. Failure to follow this
instruction may result in serious personal injury.
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
3. Drain the cooling system.
4. Remove the fuel rail and injectors. For additional information, refer to Fuel Delivery and Air Induction.
5. Disconnect the quick connect couplings and remove the PCV tube. For additional information, refer to Fuel Delivery and Air Induction.
6. Disconnect the heated PCV element electrical connector.
7. NOTE: Four-Wheel Drive (4WD) shown, Rear Wheel Drive (RWD) similar.
Disconnect the brake booster vacuum hose from the vacuum tee.
