F 150 4WD V8-4.6L VIN 8 (2010)
Housing Assembly HVAC: Service and Repair
Heater Core And Evaporator Core Housing
Heater Core And Evaporator Core Housing
Removal and Installation
NOTE: If an evaporator core leak is suspected, the evaporator core must be vacuum leak tested before it is removed from the vehicle.
NOTE: If a heater core leak is suspected, the heater core must be leak tested before it is removed from the vehicle.
NOTE: Failure to correctly install the evaporator core seal when installing the evaporator core will result in decreased A/C cooling efficiency due to
airflow bypassing the evaporator core.
1. Drain the engine coolant. For additional information, refer to Cooling System &/or Engine Block Heater.
2. Recover the refrigerant.
3. Remove the instrument panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.