ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3181 > < Initial Inspection and Diagnostic Overview|Page 3179
Page 64
background image

-

Measure the resistance between the ILCM C3498-18, circuit VDB07 (VT/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG),
harness side.

-

Are the resistances less than 5 ohms?

Yes

CONNECT the negative battery cable. GO to T4.

No

REPAIR the circuit in question. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.

Initial Inspection and Diagnostic Overview|Page 3181 > < Initial Inspection and Diagnostic Overview|Page 3179