ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3230 > < Initial Inspection and Diagnostic Overview|Page 3228
Page 113
background image

No

CONNECT the negative battery cable. GO to Y32.

-------------------------------------------------
Y13 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE ABS MODULE DISCONNECTED

 

-

Disconnect: ABS Module C135.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

If the vehicle is equipped with a 4X4 control module, GO to Y14.

If the vehicle is not equipped with a 4X4 control module, GO to Y15.

No

CONNECT the negative battery cable. GO to Y33.

-------------------------------------------------
Y14 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE 4X4 CONTROL MODULE
DISCONNECTED

 

-

Disconnect: 4X4 Control Module C2371a.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to Y15.

No

CONNECT the negative battery cable. GO to Y34.

-------------------------------------------------
Y15 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE RCM DISCONNECTED

 

-

Disconnect: RCM C310b.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

Initial Inspection and Diagnostic Overview|Page 3230 > < Initial Inspection and Diagnostic Overview|Page 3228