F 150 4WD V8-4.6L VIN 8 (2010)
4. Lower the transmission and remove the support jack.
5. Lower the transmission onto the transmission support crossmember and install the 2 transmission insulator nuts.
-
Tighten to 103 Nm (76 lb-ft).
6. Install the LH exhaust heat shield bolt to the transmission crossmember.
-
Tighten to 20 Nm (177 lb-in).
7. Install the RH exhaust heat shield bolt to the transmission crossmember.
-
Tighten to 20 Nm (177 lb-in).
4WD vehicles
8. Loosely install the transmission insulator and retainer and the 4 bolts.
