F 150 4WD V8-4.6L VIN 8 (2010)
5. Install the wheel speed sensor and the bolt.
-
Tighten to 15 Nm (133 lb-in).
6. Install the rear brake disc. For additional information, refer to Disc Brake System.
7. Install the differential housing cover and fill the differential housing with the specified lubricant. For additional information, refer to Differential
Housing Cover See: Differential Assembly/Differential Cover/Service and Repair/Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear.
8. Install the rear wheel and tire. For additional information, refer to Wheels and Tires.
Rear Drive Axle/Differential - Ford 9.75-Inch Ring Gear
Axle Shaft