F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
Installation
All vehicles
1. CAUTION: If equipped, make sure that the notches on the case flange and the anti-lock speed sensor ring are aligned.
Press the ring gear and, if removed, a new anti-lock speed sensor on the differential case.
2. Install the differential ring gear bolts.
^
Apply Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford specification WSX-M2G349-A1 to the differential ring gear
bolts.
3. With pinion depth set and the pinion installed, place the differential case in the rear axle housing.
4. Install a shim on the left side.
