F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
Drive/Propeller Shaft: Service and Repair
Driveshaft-Front
Removal and Installation
1. With the vehicle in neutral, raise and support the vehicle.
2. Remove the front driveshaft shield.
3. Index-mark the front flange and pinion flange.
^
Repeat for the rear flange (4866) and transfer case flange.
4. Remove the four bolts retaining the rear flange to the transfer case.
5. Remove the four bolts retaining the front flange to the pinion flange.
