F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
7. install the pushpins.
8. Connect the clutch pedal position switch.
9. Connect the clutch master cylinder push rod and retainer bushing.
10. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking, or towing an air suspension
vehicle. This can be accomplished by turning off the Rh kick panel area. Failure to inflation of deflation of the air springs which may
result in shifting of the vehicle during these operations.
Raise and support the vehicle.
11. Connect the clutch hydraulic line to the transmission.
12. Lower the vehicle.
13. Turn on the air suspension switch, if equipped.
14. Bleed the clutch hydraulic system.
