F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
Clutch Slave Cylinder: Service and Repair
Slave Cylinder
Removal
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking, or towing an air suspension
vehicle. This can be accomplished by turning off the Rh kick panel area. Failure to inflation of deflation of the air springs which may
result in shifting of the vehicle during these operations.
Raise the vehicle on a hoist.
2. Remove the hydraulic line from the slave cylinder.
3. Remove the slave cylinder.
Installation
1. Install the slave cylinder.
2. Install the hydraulic line.
3. Install the transmission.
4. Lower the vehicle.
5. Turn on the air suspension system, if equipped.
6. Bleed the hydraulic system.