F 150 Super Crew 4WD V8-4.6L SOHC VIN 6 (2003)
2
Use a (C) suitable adapter and press the (D) clutch diaphragm fingers until the adjusting ring moves freely.
2. Adjust the clutch pressure plate.
^
Rotate (A) adjusting ring counterclockwise until the (B) tension springs are compressed.
^
Hold (A) adjusting ring while releasing the pressure on the clutch fingers.
3. Position the (A) clutch disc on the (B) flywheel.
^
Use (C) Clutch Aligner to align the clutch disc.
4. NOTE: If reusing the clutch pressure plate and flywheel, use marks made during removal.
Position the clutch pressure on three dowels.
1
Align the clutch pressure plate.
^
Install the clutch pressure plate bolts.
2
Remove the Clutch Aligner.
5. Install the transmission.
