F 250 2WD LD Pickup V8-5.4L SOHC VIN L (1997)
(2) Remove the nuts.
(3) Remove the accumulator body.
6. If the valve body separator plate is not being serviced:
(1) Remove the bolt.
(2) Install bolt into any case threaded bolt hole on the opposite end of the separator plate.
CAUTION: Prevent the front of the valve body separator plate from sagging and displacing the check balls.
7. Remove the main valve body.
(1) Remove the bolts.
(2) Remove the nuts.
(3) Remove the main control valve body.
