F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Axle Shaft: Service and Repair
Ford Integral Carrier Type Axle
Full Floating Axle
REMOVAL AND INSTALLATION
1. Set parking brake and loosen axle shaft bolts.
2. Remove axle shaft bolts.
3. Remove axle shaft and discard gasket.
4. Install a new axle gasket and reinstall axle and bolts.
Semi Floating Axle
REMOVAL AND INSTALLATION
1. Remove axle shaft.
2. Insert tool No. T85T-1225-AH, or equivalent, and tool No. T50T-100-A, or equivalent, into axle bore so tangs on tool engage bearing outer race.
Remove bearing and seal as an assembly.
3. Install new bearing using tool No. T80T-4000-W, or equivalent, and new seal using tool No. T80T-4000-Y, or equivalent. Pack lips of seal with
tool No. C1AZ-19590-B, or equivalent.
4. Reinstall axle.
