F 250 2WD Super Duty V10-6.8L (2009)
2. Install the selector lever mechanism into the vehicle, install the upper bolts and connect the BSIA electrical connector.
-
Tighten to 6 Nm (53 lb-in).
3. Install the selector lever mechanism lower bolt.
-
Tighten to 6 Nm (53 lb-in).
4. Install the selector lever.
-
Tighten to 18 Nm (159 lb-in).
5. Connect the TCS electrical connector and the harness into the retaining clips.
6. Install the locking pin and the park lock cable.
1. Connect the park lock cable.
2. Install a new locking pin.
