F 250 2WD Super Duty V8-5.4L (2008)
5. Remove the 4 bolts and the coolant pump pulley.
6. Remove the 4 bolts and the coolant pump. Discard the O-ring seal.
^
To install, tighten to 25 Nm (18 lb-ft).
7. Clean and inspect the sealing surfaces with metal surface prep. Follow the directions on the packaging.
8. To install, reverse the removal procedure.
^
Install a new coolant pump O-ring seal. Lubricate the O-ring seal with clean engine coolant prior to installation.