F 250 2WD Super Duty V8-5.4L (2008)
Ball Joint: Service and Repair
Ball Joint - Track Bar
Ball Joint - Track Bar
Special Tools
Removal
NOTICE: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major
service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a replacement part of
lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the track bar.
3. If equipped, remove the ball joint grease fitting.
