F 250 4WD HD Pickup V8-460 7.5L VIN G EFI (1997)
Differential Case: Service and Repair
Removal & Installation
REMOVAL
1. Raise vehicle on a hoist or jack and install safety stands.
NOTE: When raising the vehicle on a hoist, make sure the hoist lift points do not rest on the caliper pins.
2. Remove the wheels and tires, and disc brake calipers.
CAUTION: Do not let the disc brake caliper hang with its weight on the brake hose or the hose may become stretched or twisted.
3. Disconnect the steering linkage from the steering knuckles.
4. Remove front stabilizer bar.
5. Remove front driveshaft.
