ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Caliper|Front|Page 7555 > < Brake Caliper|Front|Page 7553
Page 4
background image

Rotor Thickness Specification

-

Measure the front disc brake rotor thickness.
^

Replace the front disc brake rotor if not within specification.

-

Disconnect the front brake hose.

WARNING: BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES. WASH

HANDS THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING
WATER FOR 15 MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY,
DRINK WATER AND INDUCE VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.

1

Remove the front brake hose bolt.

2

Disconnect the front brake hose and plug.

3

Remove and discard the copper washers.

-

Remove the front disc brake caliper.
1

Remove the two front disc brake caliper bolts.

2

Lift the front disc brake caliper off the front disc brake caliper anchor plate.

-

Inspect the disc brake caliper for leaks. If leaks are found, disassembly is required. Refer to the procedure in this section.

INSTALLATION:

Brake Caliper|Front|Page 7555 > < Brake Caliper|Front|Page 7553