F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
2. If necessary, remove the low one-way clutch assembly by rotating it counterclockwise to unlock the tabs.
3. Inspect the following:
-
reverse clutch hub thrust surfaces for scores
-
reverse clutch hub splines for wear outer and inner
-
low/reverse one-way clutch race for scores and damaged surface areas where rollers contact races
-
rollers and springs for excessive wear or damage
-
spring and cage
ASSEMBLY
1. Follow the removal procedure in reverse order.
Reverse Clutch
REVERSE CLUTCH PISTON
DISASSEMBLY
1. Remove the reverse clutch piston outer lip seal.
2. Remove the reverse clutch piston inner lip seal.
ASSEMBLY
1. Follow the removal procedure in reverse order.
-
Make sure the lip on the seal faces the back side of the piston.
