F 250 4WD Pickup V8-7.3L DSL Turbo VIN K (1994)
Fig. 17 Depth Gauge Tool Selection.
1. Refer to chart for correct tool usage on particular axle assemblies. If any gauge surfaces become nicked, high spots must be removed with a
medium India oilstone to ensure no erroneous readings are obtained.
2. Install oil baffle into inner bearing cup bore in carrier.
Fig. 13 Inner & Outer Pinion Cup Installation Tools
3. Install inner and outer pinion cups using suitable tools.
4. Place a new inner pinion bearing over proper aligning adapter and insert into pinion bearing retainer assembly. Place outer pinion bearing into
bearing cup in carrier and assemble handle onto screw and hand tighten. Note 3/8 inch square drive in handle to be used for obtaining proper