Rear Wheel Bearing Service and Repair | F 250 4WD Super Duty V10-68L (2003) | Ford
Installation
Model 80
1. Using the special tools 205-098 and 205-278, install the inner and outer bearing cups.
^
Check if a 0.038 mm (0.0015 inch) feeler gauge can be inserted between the cups and the rear hub at any point around each cup. Reseat the
bearing cups, if necessary.
Model S135
2. Install the inner and outer bearing cups.
1
Use special tools 205-442 and 205-153 to install the inner bearing cups.
2
Use special tools 205-444 and 205-153 to install the outer bearing cups.
^
Check if a 0.038 mm (0.0015 inch) feeler gauge can be inserted between the cups and the rear hub at any point around each cup. Rescat
the bearing cups, if necessary.
All axles
3. Install the inner rear wheel bearing in the rear hub.
4. Install a new rear hub seal.
^
For model 80, use a suitable seal installer.
^
For model S135, use special tools 205-445 and 205-13.
