F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
2. Install the rear wiper pivot arm.
1
Connect the rear window washer hose.
2
Install the rear wiper pivot arm with the wiper blade parallel to the bottom of the rear window.
3
Install the retaining nut.
3. Install the rear wiper pivot arm cover.
4. Operate the rear wiper for at least one cycle and observe that the pivot arm is in the correct park position once the rear wiper motor is allowed to
park.
5. If the rear wiper pivot arm does not park in the correct position, repeat steps one and two.