F 250 4WD Super Duty V8-5.4L SOHC VIN L (1999)
2. Pry up on the metal flange of the rear axle drive pinion seal. Install gripping pliers and strike with a hammer until the rear axle drive pinion seal is
removed.
Installation
1. Lubricate the new pinion seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the rear axle drive pinion seal and replace
it with a new seal.
Use the Pinion Seal Replacer to install the rear axle drive pinion seal.
3. Install the rear axle companion flange.
