F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Fuel Line Coupler: Service and Repair
Steel Push Connect Fittings
WARNING: Perform fuel pressure release procedure before disconnecting coupling.
REMOVAL
1. Open safety clip.
2. Fit Tool T9OT-9550-B (5/16-inch) or T9OT-9550-C (3/8-inch) to coupling so that tool can enter female fitting.
3. Push the tool into female fitting to release the retaining fingers from the formed male tube end.
4. Pull male and female fittings apart.
5. Remove the tool from the disconnected fitting.
6. Inspect the fitting for any internal parts that might have been damaged. Fuel tube should be replaced if internal parts are damaged.
INSTALLATION
1. Align the fitting and tube axially.
2. Push the tube into the fitting. When properly engaged, a definite "click" will be heard.
