F 350 2WD Super Duty V10-6.8L VIN S (1999)
1. Remove the utility tray, if necessary.
2. Remove the safety belt bolts.
1
Use the T-55 Torx bit to remove the safety belt buckle bolt.
2
Use the T-55 Torx bit to remove the safety belt tongue bolt.
3. Remove the safety belt.
1
Remove the safety belt buckle.
2
Remove the safety belt tongue.
INSTALLATION
1. Follow the removal procedure in reverse order.
-
Check the restraint system for proper operation.
NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten nuts and bolts to specification.
Rear - Supercab