F 350 2WD Super Duty V8-5.4L (2008)
11. CAUTION: Do not remove the Timing Chain Wedge tool at any time during assembly. If the special tool is removed or out of placement,
the engine front cover must be removed and the engine must be retimed.
CAUTION: The timing chain must be installed in its original position onto the camshaft phaser and sprocket using the scribed marks, or
damage to valves and pistons will result.
NOTE: RH shown, LH similar.
Scribe a location mark on the timing chain and the camshaft phaser and sprocket assembly.
12. CAUTION: When removing the front thrust camshaft bearing cap, use care as the cap may be damaged from side loading when
removing the cam unequally in height from the bearing towers.
Remove the 2 bolts and the camshaft front bearing cap.