F 350 2WD Super Duty V8-5.4L (2008)
Engine Block Heater: Service and Repair
Block Heater - Gasoline Engines
Block Heater - Gasoline Engines
Removal and Installation
1. Drain the engine cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding.
2. CAUTION: Do not loosen the block heater retaining screw more than necessary for removal. The nut can fall off inside the engine and
damage the cooling system.
Loosen the block heater retaining screw and remove the block heater.
^
To install, tighten to 4 Nm (35 lb-inch).
3. CAUTION: Route the block heater power cable away from hot or rotating components, or damage to the cable can occur.
To install, reverse the removal procedure.
