F 350 2WD Super Duty V8-5.4L (2008)
15. CAUTION: Damage to the variable camshaft timing (VCT) phaser sprocket assembly will occur if mishandled or used as a lifting or
leveraging device.
CAUTION: Only use hand tools to remove the variable camshaft timing (VCT) phaser sprocket assembly or damage may occur to the
camshaft or VCT phaser sprocket.
Using the special tool, remove the bolt and the LH VCT phaser sprocket assembly.
^
Discard the VCT phaser sprocket bolt.
16. CAUTION: Remove the front thrust camshaft bearing cap straight upward from the bearing towers or the bearing cap may be damaged
from side loading.
Remove the 2 bolts and the RH cylinder head camshaft front bearing cap.
17. CAUTION: The camshaft bearing caps must be installed in their original locations. Record camshaft bearing cap locations. Failure to
follow these instructions may result in engine damage.
Remove the remaining bolts in the sequence shown and remove the RH cylinder head camshaft bearing caps.
