F 350 2WD Super Duty V8-5.4L (2008)
17. NOTE: The lower half of the timing chain must be positioned above the tensioner arm dowel.
NOTE: The camshaft phaser and sprocket will be stamped with one of the illustrated timing marks for the RH camshaft.
Position the RH timing chain on the VCT phaser sprocket. Make sure the timing mark is positioned between the 2 copper (marked) chain links.
18. Position the RH timing chain tensioner arm on the dowel pin and install the RH timing chain tensioner and bolts.
^
Tighten to 25 Nm (18 lb-ft).
