F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
14. Force the differential case as far as it will go in the opposite direction. Record the total differential case end play reading.
15. After making sure the reading is repeatable, remove the special tools and the differential from the differential housing. Do not remove the Master
Bearings from the differential case at this time.
16. Position the special tools and the inner and outer pinion bearing cups in their respective housing bores.
1
After placing the inner outer bearing cups in their bores, place the special tool (inner) on the inner pinion bearing cup.
2
Place the special tool (outer) on the outer pinion bearing cup.
3
Install the special tool.
17. Tighten the special tool to seat the pinion bearing cups into their bores.
