F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
6. Loosen the spindle nut two turns.
7. Tighten the spindle nut while rotating the front disc brake hub and rotor.
8. Loosen the spindle nut.
9. Tighten the spindle nut while rotating the front disc brake hub and rotor.
10. Install the following components:
1
Install the nut retainer.
2
Install the cotter pin.
3
Install the hub grease cap.
11. Install the front disc brake caliper anchor plate.
