F 350 4WD Pickup V8-7.3L DSL (1988)
Figure 1
1.
Remove the nut from the valve shaft and remove the leading arm of the linkage assembly, Figure 1, Save the nut.
2.
Remove the two (2) nuts from the differential housing bolts and remove the linkage bracket, Figure 1.
3.
Return the linkage to the customer.
Figure 3
4.
Rotate the valve shaft one (1) full turn in either direction. Position the shaft with the flat at the bottom and parallel with the ground, Figure 3.
Figure 4
5.
Rotate the valve shaft counter-clockwise 90~ so that the flat of the shaft is vertical, Figure 4.