F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
25. Remove the differential case from the housing.
NOTE: If runout is within specification, install a new ring gear and pinion. If runout exceeds specification, the ring gear is true and the concern is
due to either a damaged differential case or differential bearings. Inspect the differential bearings. If the differential bearings are not damaged,
replace both the differential case and the differential bearings.
26. Assemble the Pinion and Carrier Bearing Puller.
27. Position the Pinion and Carrier Bearing Puller.
28. Use the Pinion and Carrier Bearing Puller to remove the differential bearing.
^
Repeat the procedure for the other side.
29. Install the new differential bearings.
1
Position the appropriate differential bearing (RH or LH).
