F 350 4WD Super Duty V8-5.4L SOHC VIN L (1999)
Oil Pan: Service and Repair
Installation
1. NOTE: The oil pump screen cover and tube must be in the oil pan when the oil pan is positioned in the vehicle.
Position the oil pan gasket and the oil pan in the vehicle from the rear of the engine.
2. Install the oil pump screen cover and tube.
^
Position the oil pump screen cover and tube on the engine.
^
Install the two front bolts.
3. Install the rear bolt.
4. NOTE: If the oil pan is not secured within 4 minutes, the sealant must be removed and the sealing area cleaned with Metal Surface Cleaner
F4AZ-19A536-RA or equivalent meeting Ford specification WSE-M5B392-A. Allow to dry until there is no sign of wetness, or 4 minutes,
whichever is longer. Failure to follow this procedure can cause future oil leakage.
Apply a bead of silicone where the front cover and rear crankshaft seal retainer fit to the engine block.
^
Use Silicone Gasket and Sealant F6AZ-19562-A or equivalent meeting Ford specification WSE-M4G323-A6.
