F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
8. Clean and inspect the following:
^
The seal mounting surface.
^
The flange lugs and the flange end that contacts the bearing cone.
-
Verify that the flange nut counterbore and the seal contact surfaces are smooth and free of nicks.
Installation
1. Using a suitable driver, install the pinion seal.
^
Lightly coat the pinion seal lip with lubricant.
2. CAUTION: Never use a metal hammer on the pinion flange or install the flange with power tools. If necessary, use a plastic hammer to tap on a
tight fitting flange.
NOTE: Align the index marks.
Lightly coat the flange splices and seal mating area with lubricant, then install the flange with a new washer and nut.