F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Part 2 Of 2
Removal
1. Remove the radiator.
2. Remove the accessory drive belt.
3. Raise and support the vehicle.
Note: This step is for vehicles equipped with automatic transmissions only.
4. Remove the flywheel housing cover retaining screws and flywheel housing cover.
5. Remove the crankshaft vibration damper, using the damper remover.
6. Using the Tube Remover and Impact Slide Hammer, carefully remove the crankshaft front seal.