F 450 2WD Super Duty V10-6.8L VIN V (2005)
Seat Belt Buckle: Service and Repair
Safety Belt Buckle - Front, Bench Seat
SAFETY BELT BUCKLE - FRONT, BENCH SEAT
Tool Set, Torx Bit
Special Tool(s)
Removal
1. Remove the utility tray, if necessary.
2. Remove the safety belt buckle bolts.
1
Use the T-55 Torx bit to remove the LH safety belt buckle bolt.
2
Disconnect the safety belt warning indicator switch connector.
3
Use the T-55 Torx bit to remove the RH safety belt buckle bolt.
3. Remove the safety belt buckles.
1
Remove the LH safety belt buckle.
2
Remove the RH safety belt buckle.
Installation