F 450 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Hood Latch Release: Service and Repair
Hood Latch Release Handle
HOOD LATCH RELEASE HANDLE
Removal and Installation
1. Remove the A-pillar lower trim panel.
2. Remove the 3 parking brake control nuts.
-
To install, tighten to 25 Nm (18 lb-ft).
3. Position the parking brake control aside.
4. Remove the E-clip, release the return spring and position the hood latch release handle aside.
5. Release the hood latch release cable and remove the hood latch release handle.
6. To install, reverse the removal procedure.